Home >Module>SPI/SOC/UART>Other

RD400D Module radio numérique Ebyte 410-470MHz TRIMTALK/TRIMMARK3/TRANSEOT

[Interface de communication]:UART

[Puissance d'émission]:30 dBm

[Distance de communication]: 5,6 km

[Méthode de modulation]: GMSK/4FSK

[Poids du produit]:4.8±0.1g

[Introduction]:RD400D est un module de transmission de données émetteur-récepteur-émetteur à fréquence fixe intégré monté sur table (radio), fonctionnant dans la bande de fréquences 410 MHz ~ 470 MHz, se concentrant sur l'arpentage et la cartographie, l'agriculture de précision, les drones et l'Internet des objets L'environnement d'application a le caractéristiques de poids léger, de petite taille, de faible consommation d'énergie et de performances de réception supérieures. Il prend en charge une variété de sélections d'engrenages de puissance, une commutation gratuite du débit en bauds d'air, une sélection de débit en bauds de port série riche et une utilisation facile.
Prise en charge de TRIMTALK, TRIMMARK3, TRANSEOT (OU PCC OU PROTOCOLE TRANSPARENT).

RD400D


Pin serial numberPin nameInputoutputPin usage
1GNDInputoutputPower ground
2RSSIoutputAnalog voltage output, indicating received signal strength, voltage output range: 0.5V-2.5V = The higher the voltage, the stronger the signal reception.
3-6NCinputDangling (for internal testing use)
7-9NCNC
10-13IOInput outputobligate
14-16NCNC
17GNDInput outputPower ground
18-19NCNC
20-24IOobligateobligate
25-26GNDInputoutputPower ground
27NCNC
28RXDinputSerial port receiving interface
29TXDoutputSerial port send interface
30-36NCNC
37-38NCinputobligate
39-41GNDInputoutputPower ground
42-44NCNC
45RSTinputModule reset pin: active low
46CONFIGinputModule parameter configuration mode control pin, low level into parameter configuration mode, High level exits parameter configuration mode
47-61NCNC
62-64VCCinputPower input pin (3.3-3.6V): the use of the need to 62, 63: 64 pin all connected.
65-67GNDInputoutputPower ground
68-77NCNC
78-80GNDInputoutputPower ground