E32-900T30D Transmetteur de Port série sans fil Modulation LoRa 30dBm 868/915MHz 1W Antenne CDEBYTE DIP 8km
[La fréquence]：862～930MHz
[Du pouvoir]：30dBm
[Distance]：8km
[Taille]：24*43mm
[Poids du produit]：9±0.1g
[Introduction]：E32-900T30D est un module de port série sans fil (UART) basé sur la solution LoRa de SEMTECH. Il dispose d'une variété de modes de transmission, fonctionne sur la technologie à spectre étalé LoRa 862 MHz ~ 931 MHz et dispose d'une sortie TTL.
Magasin officiel
| Serial Number | pin | Pin direction | Remark |
| 1 | M0 | Input (very weak pull-up) | In conjunction with M1, it determines the module's four operating modes (it cannot be left floating; if not in use, it can be grounded). |
| 2 | M1 | Input ( very weak pull-up ) | In conjunction with M0, it determines the module's four operating modes (it cannot be left floating; if not in use, it can be grounded). |
| 3 | RXD | Input | TTL serial port input, connected to the external TXD pin (configurable as open drain or pull-up input, see manual for details). |
| 4 | TXD | Output | TTL serial port output, connected to the external RXD pin (configurable as open-drain or push-pull output, see manual for details ). |
| 5 | TO | Output | Used to indicate the module's operating status; outputs a low level during the power-on self-test initialization period when the user wakes up the external MCU. It can be configured as an open-drain output or a push-pull output; see parameter settings for details. (Can be left floating) |
| 6 | VCC | Input | Module power supply positive reference, voltage range: 3.0V~5.5V DC |
| 7 | GND | Input | Module ground wire |
| 8 | Fixing hole | Fixing hole | |
| 9 | Fixing hole | Fixing hole | |
| 10 | Fixing hole | Fixing hole | |
| 11 | Fixing hole | Fixing hole |