Essai gratuit MagasinMagasinMagasin
Partager
FR FR
ENESCN
Home >Module>SPI/SOC/UART>SI44**
Wireless Module
Rf Module
Long Transmission Distance
Wireless Module
Rf Module
Long Transmission Distance

E30-900M30S Ebyte Pas Cher En Vente Émetteur-Récepteur Longue Distance De Transmission Modules Sans Fil Et RF

[IC]：SI4463

[Frequency]：855～925MHz

[Power]：30dBm

[Distance]：5.6km

[Size]：38.5*24mm

[Poids du produit]：5.4±0.1g

[Introduction]：E30-900M30S est un module matériel (SPI) basé sur la puce RF SI4463 importée de Silicon Labs. Il s'agit d'un émetteur-récepteur intégré SMD semi-duplex avec transmission transparente disponible. Avec une bande de fréquence de travail de 855 à 925 MHz, une puissance de transmission de 1 W, il convient à une variété d'environnements.

Envoyer demande
Acheter
Téléchargements de fichiers Comparer
1
Pin No. Item Direction Description
1 GND -    Ground wire, connected to the power reference ground
2 GND -    Ground wire, connected to the power reference ground
3 GND -    Ground wire, connected to the power reference ground
4 GND -    Ground wire, connected to the power reference ground
5 GND -    Ground wire, connected to the power reference ground
6 IO_2 Output    Configurable universal GPIO port (see SI4463manual for details)
7 IO_3 Output    Configurable universal GPIO port (see SI4463manual for details)
8 IO_0 Output    Configurable universal GPIO port (see SI4463manual for details)
9 VCC -    Power supply, 3.3~5.5V, 5V is recommended (It is also recommended to add external ceramic filter capacitor)
10 VCC -    Power supply, 3.3~5.5V, 5V is recommended (It is also recommended to add external ceramic filter capacitor)
11 GND -    Ground wire, connected to the power reference ground
12 GND -    Ground wire, connected to the power reference ground
13 IO1 Output    Configurable universal GPIO port (see SI4463manual for details)
14 IRQ Output    SPI interrupt request
15 SDN -    Shutdown Input Pin. It is low level when working(See SI4463 manual for more details)
16 MISO Output    SPI master output slave input
17 MOSI Input    SPI master input slave output
18 SCK Input    Serial Clock Input
19 NSEL Input    SPI Chip select for starting SPI communication
20 GND -    Ground wire, connected to the power reference ground
21 ANT Input/Output    Antena
22 GND -    Ground wire, connected to the power reference ground