E22-400T30E_SX12**_SPI/SOC/UART_Module_Fabricants de modems sans fil Lora en Chine, fournisseurs de terminaux IoT industriels

Home >Module>SPI/SOC/UART>SX12**

E22-400T30E module de transmission sans fil longue distance 10 km module de contrôleur de relais récepteur lora

[Fréquence]：410.125～493.125MHz

[Puissance d'émission]：30 dBm

[Distance de communication]： 10 km

[Taille]：30 * 51mm

[Poids du produit]：7.7±0.1g

[Introduction]：E22-400T30E est une nouvelle génération de module sans fil LoRa. Il est conçu sur la base du module de port série sans fil (UART) de la puce RF de SEMTECH et du schéma de puce SX1268 original de SEMTECH. Il a une variété de méthodes de transmission, fonctionne dans la bande de fréquence (410,125 ~ 493,125 MHz) (par défaut 433,125 MHz), technologie de spectre étalé LoRa, sortie de niveau TTL, compatible avec la tension de port IO 3,3 V et 5 V.

Envoyer demande

Acheter

Téléchargements de fichiers Comparer

Pin number	Pin name	Pin Orientation	Pin usage
1	AUX	Output	It is used to indicate the working state of the module; the user wakes up the external MCU, and outputs a low level during the power-on self-test initialization; (can be left floating)
2	VCC	Enter	Power input 5.0V
3	M0	Input (very weak pull-up)	Cooperate with M1 to determine the 4 working modes of the module(can not be suspended, if not used, it can be grounded)
4	GND	-	Power reference ground
5	M1	Input (very weak pull-up)	Cooperate with M0 to determine the 4 working modes of the module(can not be suspended, if not used, it can be grounded).
6	NC	-	-
7	NC	-	-
8	NC	-	-
9	GND	-	Power reference ground
10	SWD_DIO	Input/Output	Program download data interface (the module needs to be reset or chip erased before SWD programming).
11	RXD	enter	TTL serial port input, connect to external TXD output pin
12	SWD_CLK	Input/Output	Program download clock interface (the module needs to be reset or chip erased before SWD programming)
13	TXD	output	TTL serial output, connect to external RXD input pin
14	NC	-	NC pin, this pin needs to be left floating (for subsequent expansion)
15	GND	-	Power reference ground
16	NC	-	-
17	NC	-	-
18	GND	-	Power reference ground
19	NC	-	-
20	NC	-	Power reference ground
21	GND	-	Power reference ground
22	RESET	enter	Input high level module enters hardware reset state, input low level module returns to normal working state, this function is used for reset operation in emergency
23	NC	-	-
24	VCC	enter	Power input 5.0V
25	NC	-	-
26	GND	-	Power reference ground
27	GND	-	Power reference ground
28	NC	-	-
29	GND	-	Power reference ground
30	NC	-	-
31	NC	-	-
32	NC	-	-
33	NC	-	-
34	GND	-	Power reference ground
35	GND	-	Power reference ground
36	USB_D-	Input / Output	D- for external USB devices
37	GND	-	Power reference ground
38	USB_D+	Input / Output	D+ for external USB devices
39	VCC	Input	Power input 5.0V
40	GND	-	Power reference ground
41	VCC	Input	Power input 5.0V
42	NC	-	-
43	GND	-	Power reference ground
44	NC	-	-
45	RS232_RXD	Input	External TXD of other RS232 devices
46	NC	-	-
47	RS232_TXD	Output	External TXD of other RS232 devices
48	NC	-	-
49	RS485_A	Input / Output	Connect to the A terminal of other RS485 devices
50	GND	-	Power reference ground
51	RS485_B	Input / Output	Connect to the B terminal of other RS485 devices
52	VCC	Input	Power input 5.0V

